The upper bin supports up to 500 sheets of paper in A3, A4, A5, Folio, Executive, JIS-B4, JIS-B5, Letter, Legal, Ledger or Tabloid and Statement sizes. Paper (16 to 58 lb., 60 to 220 gsm) and glossy paper may be used in this bin.
Bin 1, the middle bin, supports up to 1500 sheets of paper in A3, A4, Executive, Folio, JIS-B4, JIS-B5, Letter, Legal and Ledger or Tabloid sizes. Paper (16 to 58 lb., 60 to 220 gsm) may be used in this bin. Stapling of sets of 50 sheets of paper is supported. Hole punching of paper (16 to 47 lb., 60 to 176 gsm) and offset stacking is supported. Bin 1 has a empty and a full sensor.
Bin 2, the lower bin, supports paper in A3, A4, Executive, Folio, JIS-B4, JIS-B5, Letter, Legal and Ledger or Tabloid sizes (16 to 24 lb., 60 to 90 gsm). The lower bin, supports saddle stapling of up to 18 sets with up to 15 sheets of folded 20 lb. (75 gsm) paper. Bin 2 has a full sensor.
Requirement to use a Finisher
One of the 2520-Sheet Tandem Tray Module, 3x520-Sheet Drawer Stand or the 520-Sheet Drawer Stand is required to raise the printer or MFP to the correct height for use with the 3500-Sheet Finisher or the Booklet Finisher.
998 x 750 x 680 mm
Packaged size (HxWxD)
1221 x 1161 x 765 mm
Specified operating environment
Temperature: 16 to 32°C, Humidity: 8 to 80% relative humidity, Altitude: 0 - 2500 meters
Country of origin
Media sizes supported
A3, A4, Executive, Folio, JIS-B4, JIS-B5, Ledger, Legal, Letter
Media types supported
Paper weight range supported
Bin 1 = 60 - 220, Bin 2 = 60 - 90 g/m²
Offset stacking, Stapling, Hole punching, Booklet fold and saddle stapling