MS911, MX91x Booklet Finisher (4-Hole)

Features

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.

Upper Bin 1

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.

Middle Bin 2

Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor.

Booklet Bin 3

Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 18 sets with up to 15 sheets of folded 20 lb. (75 gsm) paper per set. Bin 3 has a paper present sensor.

Considerations

The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.

The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Tech Specs

Part Number
26Z0082
Paper Weight Range Supported (gsm)
60 ~ 256 gsm
Finishing Functions
Offset stacking
Stapling
Hole punching
Booklet fold and saddle stapling
Media Types Supported
Glossy paper
Plain Paper
Media Sizes Supported
A3
A4
JIS-B4
Ledger
Legal
Letter
Super Tabloid (305 x 457 mm)
SRA3
Packaged Size (mm - H x W x D)
806 x 792 x 1095 mm
Packaged Weight, kg
82.0 kg
Size (mm - H x W x D)
1065 x 641 x 658 mm
Weight
67.2 kg
Country of Origin
China (PR)
UNSPSC Code
44101705