C792 Banner Media Tray
The Banner Media Tray is an extension of the Multi Purpose Feeder and allows the automatic feeding of up to 50 sheets of 24 lb. banner paper. It also serves as an extension of the output tray, to hold the printed banner paper as it exits from the printer.
This tray supports banner paper in sizes from 8.27 to 8.5 inches wide (210 to 216 mm) to 14 to 48 inches long (355 to 1219 mm), for weights from 24 to 36 lb. (90 to 135 gsm). The stack height is 10 mm.
Banner paper must be printed with Paper Weight set to Heavy
All media which can be fed from the Multi Purpose Feeder can be used when the Banner Media Tray is attached.
The tray cannot be used with a finisher, stacker or mailbox. Banner paper is not supported using duplex mode.
- Part Number
- Paper Input Capacity, Maximum
- Up to 50 pages 75 gsm bond
- Paper Weight Range Supported (gsm)
- 90 - 176 gsm
- Media Types Supported
- Banner Paper
- Packaged Size (mm - H x W x D)
- 505 x 860 x 820 mm
- Packaged Weight, kg
- 12.7 kg
- Size (mm - H x W x D)
- In: 210 x 1150 x 290, Out: 650 x 740 x 280 mm
- In: 4.7, Out: 3.6 kg
- Country of Origin
- United States
- UNSPSC Code