MS911, MX91x Staple Punch Finisher (4-Hole)
Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.
Upper Bin 1
The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.
Lower Bin 2
The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor.
The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilised. Hole punching and offset stacking are supported to Bin 2 only.
The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.
Size (mm - H x W x D)
1065 x 641 x 658 mm
Packaged Size (mm - H x W x D)
806 x 792 x 1095 mm
Packaged Weight (kg)
Pallet Weight (kg)
Country of Origin
Media Sizes Supported
A3, A4, Executive, JIS-B4, JIS-B5, Ledger, Legal, Letter
Media Types Supported
Paper Weight Range Supported (gsm)
60 - 256 gsm
Offset stacking, Stapling, Hole punching