The following tables provide information on standard and optional paper sources and the types of paper they support.
Note: For an unlisted paper size, configure a Universal Paper Size. |
For information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site at www.lexmark.com/publications.
Paper size | Dimensions | 250- or 550-sheet trays (standard or optional) | Optional 2000-sheet tray | Multipurpose feeder | Duplex unit |
---|---|---|---|---|---|
1 This size appears in the Paper Size menu only when the paper source does not support size sensing or when size sensing is turned off. 2 Only the standard exit bin supports this size. 3This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application. 4 To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in); Universal length must be between 182 mm (7.2 in) and 356 mm (14 in). | |||||
A4 | 210 x 297 mm (8.3 x 11.7 in.) | ||||
A5 | 148 x 210 mm (5.8 x 8.3 in.) | X | |||
A61,2 | 105 x 148 mm (4.1 x 5.8 in.) | X | X | X | |
JIS B5 | 182 x 257 mm (7.2 x 10.1 in.) | X | |||
Letter | 216 x 279 mm (8.5 x 11 in.) | ||||
Legal | 216 x 356 mm (8.5 x 14 in.) | ||||
Executive | 184 x 267 mm (7.3 x 10.5 in.) | X | |||
Oficio1 | 216 x 340 mm (8.5 x 13.4 in.) | X | |||
Folio1 | 216 x 330 mm (8.5 x 13 in.) | X | |||
Statement1 | 140 x 216 mm (5.5 x 8.5 in.) | X | X | ||
Universal3,4 | 138 x 210 mm (5.5 x 8.3 in.) up to 216 x 356 mm (8.5 x 14 in.) | X | X | ||
70 x 127 mm (2.8 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.) | X | X | X | ||
148 x 182 mm (5.8 x 7.7 in.) up to 216 x 356 mm (8.5 x 14 in.) | X | ||||
7 3/4 Envelope (Monarch) | 98 x 191 mm (3.9 x 7.5 in.) | X | X | X | |
9 Envelope | 98 x 225 mm (3.9 x 8.9 in.) | X | X | X | |
10 Envelope | 105 x 241 mm (4.1 x 9.5 in.) | X | X | X | |
DL Envelope | 110 x 220 mm (4.3 x 8.7 in.) | X | X | X | |
Other Envelope | 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.) | X | X | X |
Note: An optional 250-sheet Universally Adjustable Tray is available for sizes smaller than A5, such as index cards. |
The printer engine supports 60–176 g/m2 (16–47 lb) paper weights. The duplex unit supports 63–170 g/m2 (17–45 lb) paper weights.
Paper type | 250- or 550-sheet trays (standard or optional) | Optional 2000-sheet tray | Multipurpose feeder | Duplex unit |
---|---|---|---|---|
1 Printing labels requires a special label fuser cleaner which prevents duplexing. The label fuser cleaner is included with the special cartridge required for label applications. | ||||
Paper
| ||||
Card stock | ||||
Envelopes | X | X | X | |
Labels 1
| ||||
Transparencies |
Use this table to determine the possible output destinations of print jobs which use supported paper types and weights. The paper capacity of each output bin is listed in parentheses. Paper capacity estimations are calculated based on 75 g/m2 (20 lb) paper.
The Finisher supports 60–176 g/m2 (16–47 lb) paper weights.
Paper type | Finisher standard bin (250 or 550 sheets) | Output Expander (550 sheets) or High Capacity Output Stacker (1850 sheets) | 5-Bin Mailbox (500 sheets)1 | StapleSmart Finisher (500 sheets2) |
---|---|---|---|---|
1 Supports 60-90 g/m2 (16-24 lb) paper weights. 2 Maximum of 50 sheets per stapled packet. 3 Printing labels requires a special label fuser cleaner which prevents duplexing. The label fuser cleaner is included with the special cartridge required for label applications. | ||||
Paper
| ||||
Card stock | X | |||
Envelopes | X | X | ||
Labels 3
| X | X | ||
Transparencies | X | X |