Back to Main Page

Copy dialog

Fine-tune the copy settings, and do creative copying jobs on the Copy dialog of the Lexmark 4300 Series Center. To open the Copy dialog, select Copy tab  Preview/Edit.

The Copy dialog has four main sections: the Settings tab, the Adjustments tab, the Finishing tab, and the preview area.

From

Go to

To

Settings tab

Copy Type

Select the color for copies.

  • Color—For all color documents and images.
  • Grayscale—For black-and-white images.
  • Black—For text-only documents.

Copy Quality

Select a quality setting for copies.

  • Photo—For the highest quality photos, and for documents with vibrant graphics.
  • Normal—For most text-only copy jobs. This is the default copy quality setting.
  • Quick Copy—For copying drafts or text-only documents quickly and with reduced quality.
  • Automatic—The All-In-One sets the print quality according to the paper type loaded.

Descreen

Remove wavy patterns from magazines or newspapers. Many types of printed media are created using a screen printing process. Screen printing results in documents that are made up of many small dots that, when viewed from a distance, form the contents of the document. This screen printing pattern of dots is often exaggerated by scanning. The result is typically noticeable as a geometric pattern appearing in what should be solid colors. Descreening helps remove the screen printing pattern of dots.

Choose Photo, Text, Art Print, Magazine, Newspaper, or None as the Descreen option. For more information, see Descreening.

Reduce Background Noise

Remove smudges and light background shading in color documents.

Adjustments tab

Brightness

Adjust the lightness or darkness of the scanned image.

Contrast

Adjust the detailing and tone of the image as it is set off against a light or dark background. Increasing contrast makes light colors lighter and dark colors darker. Decreasing contrast flattens the light and dark colors to create a flushed image.

Gamma

Increase or decrease the color correction curve. Enabling gamma lets you adjust the amount of ink placed on the page. Decreasing the gamma causes more ink to be placed on the page and darkens the printed document. Increasing the gamma causes less ink to be placed on the page and lightens the printed document.

Blur/Sharpen

Adjust the level of sharpness of the scanned image.

Fine Tune Rotation

Tilt the image 10 degrees to the left or right.

Invert Colors

Reverse the colors of the image by inverting the RGB data. The effect created is similar to that of a film negative.

Mirror

Produce a mirror image of the document.

Orientation

Change the position of the image in the preview area. Shift between portrait or landscape orientation.

Defaults

Reset the Adjustment controls to the factory default settings.

Finishing tab

Resize

Enlarge or reduce the image. Choose a preset value, or enter a scale percentage for the image.

Layout

  • Select None for layouts other than Poster and Clone.
  • Select Poster to print a single image on several sheets of paper. Selecting Poster enables the Print crop marks option that lets you print crop marks on copies to aid in trimming.
  • Select Clone to print multiple copies of an image on one page. Selecting Clone enables the Print page borders option that lets you print borders on copies.

Borderless Printing Options

  • Select Automatic to enable borderless copy when quality is set to Normal and Photo.
  • Note: When quality is set to Quick, borderless copy is automatically set to Off.
  • Select Off to disable borderless copy in all quality settings.

Preview area

See a preview of the image. Some settings in the Copy dialog are interactive, so you can view the changes on the image as you adjust the settings. When you click Preview Again, the original document is re-scanned and recent changes are applied on the image in the preview area.

Auto-crop sensitivity

Select or clear Auto-crop sensitivity to turn auto-cropping on or off. Adjust the Auto-crop sensitivity slider to fine-tune auto-cropping.

Width and height display

See the dimension of the scanned image. Select your preferred unit of measurement from the pop-up menu.

At the bottom of the preview area are the following buttons:

Click

To

Go to the Help Center for more information.

Cancel

Exit the current dialog without any changes.

Preview Again

Refresh the image in the preview area.

Copy

Start copying.