Back to Main Page

Removing a used cartridge

  1. Make sure the All-In-One power light is on.
  2. Open the scanner unit. The cartridge carrier moves and stops at the loading position unless the All-In-One is busy.
  3. Press the cartridge lever to raise the cartridge lid.

  4. Remove the old cartridge. To recycle the old cartridge, see Recycling Lexmark products.

    Note: If you are removing both cartridges, repeat steps 3 through 4 for the second cartridge.
    1. When removing the photo cartridge to replace it with a black cartridge, or when removing the black cartridge to replace it with a photo cartridge, store the cartridge not being used in the storage unit provided.

    2. Place the storage unit in the cartridge storage area in the All-In-One.

Continue Installing the print cartridges, and then close the scanner unit to resume a print, copy, or scan job.

Related topics

Opening the scanner unit

Closing the scanner unit

Installing the print cartridges

Preserving the print cartridges

Back to Maintaining the All-In-One