X792 Banner Media Tray

Funktioner

The Banner Media Tray is an extension of the Multi Purpose Feeder and allows the automatic feeding of up to 50 sheets of 24 lb. banner paper. It also serves as an extension of the output tray, to hold the printed banner paper as it exits from the printer.

This tray supports banner paper in sizes from 8.27 to 8.5 inches wide (210 to 216 mm) to 14 to 48 inches long (355 to 1219 mm), for weights from 24 to 36 lb. (90 to 135 gsm). The stack height is 10 mm.

Banner paper must be printed with Paper Weight set to Heavy

All media which can be fed from the Multi Purpose Feeder can be used when the Banner Media Tray is attached.

The tray cannot be used with a finisher, stacker or mailbox. Banner paper is not supported using duplex mode.

Tekniska specifikationer

Storlek (mm - H x B x D)

In: 210 x 1150 x 290, Out: 650 x 740 x 280 mm

Storlek med förpackning (mm - H x b x D)

505 x 860 x 820 mm

Vikt

In: 4.7, Out: 3.6 kg

Skrivaren och förpackningens vikt (kg)

12.7 kg

UNSPSC kod

44.10.17.05

Pallvikt (kg)

not define kg

Ursprungsland

United States

Pappersinmatningskapacitet, Maximalt: Upp till

50 ark på 75 g/m²

Hanterade mediastorlekar

Banderoll (upp till 210 x 1219 mm)

Hanterade mediatyper

Banderoll papper

Pappersvikter som stöds (g)

90 - 135 gsm