Melden Sie sich bei OnePrint an
Websites von Drittanbietern werden nicht von Lexmark betrieben und haben eigene Richtlinien zur Datenerhebung und zum Datenschutz.
The RFID UHF Option is a RFID (EPC Global Class 1, Generation 2 tag – ISO 18000-6C) programming device for the T654 laser printers. The RFID tags can be programmed via PCL commands or using electronic forms created with LDSS Forms Composer 3.3.8 with Service Pack 4.
The RFID UHF Option must be the first device placed under the printer. One input drawer is required below the RFID Option to contain the RFID media for printing and programming.
All RFID tags must be built to EPC class 1 generation 2 specifications (ISO 18000-6C).
The RFID tags can be programmed via PCL commands or using electronic forms created with Lexmark Document Solutions Suite Forms Composer 3.3.8 with Service Pack 4.
The fuser wiper included in the package is designed specifically for label applications. This fuser wiper is not recommended for duplex applications. It is recommended that Label Application print cartridges are used with this option.
The RFID tag can be located on either the printed or non-printed side of the media, although printing on the tag is not recommended.
RFID Programming while Printing speed: Up to 20 ppm when programming RFID tags using letter size media. Individual ppm performance may vary depending on media size, type, RFID tag and image complexity.
The StapleSmart II Finisher (30G0850) may not be used with RFID media. The 5-Bin Mailbox (30G0852) is not recommend for use with the RFID media.
The RFID tag may be located within a large area of the media sheet and may be oriented either parallel to or perpendicular to the long edge of the media. The tag location limitations and recommendations are shown in the T65x RFID UHF User's Guide.
US / Canada – supports radio frequencies in the 902-928 MHz (ultra high frequency (UHF)) range.
Setup: System integration is required. Contact your Lexmark representative for assistance.
Other locations for the RFID tag may be acceptable. Please consult with the Lexmark Specialty Media Support Group for additional information. Do not place a large order for media without first verifying that the selected media design provides acceptable printing performance and transport reliability, and that the selected RFID tag is successfully programmed by the RFID Option.
Australia – supports radio frequencies in the 915-928 MHz (ultra high frequency) range.
See the RFID UHF Option User’s Guide Supplement for tag placement details.
Europe – supports radio frequencies in the 865.6 - 867.6 MHz (ultra high frequency) range.
Teilenr. | 30G0955 |
---|---|
Abmessungen (H x B x T) |
|
Gewicht |
|
Abmessungen Verpackung (H x B x T) |
|
Gewicht verpackt |
|
Produkt-Zertifikate |
|
---|
Alle angegebenen Informationen können ohne Vorankündigung geändert werden. Lexmark übernimmt keine Haftung für Fehler oder Auslassungen.
Brauchen Sie noch Hilfe?
Für Support zum Lexmark Shop und allgemeine Fragen rufen Sie
0800 101 6362 an
email: ecomsupportemea@lexmark.com
Öffnungszeiten: Montag bis Freitag,
9:00 Uhr bis 18:00 Uhr, mitteleuropäische Zeit
Auf dieser Website werden Cookies für verschiedene Zwecke verwendet, z. B. zur Verbesserung Ihrer Benutzererfahrung, für Analysen und für Werbung. Indem Sie die Website weiterhin nutzen oder auf "Akzeptieren und schließen" klicken, stimmen Sie der Verwendung von Cookies zu. Lesen Sie hierzu auch die Informationen auf der Seite "Cookies".