CS/CX92x, MS/MX91x Booklet Fin (3-Hole)


Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.

Upper Bin 1

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.

Middle Bin 2

Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor.

Booklet Bin 3

Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 20 sets with up to 3 sheets of folded 20 lb. (75 gsm) paper per set. Or it supports up to 5 sets with up to 20 sheets per set. Bin 3 has a paper present sensor.


The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.

The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Tech Specs

Part Number
Paper Weight Range Supported (gsm)
60 ~ 256 gsm
Finishing Functions
Offset stacking
Hole punching
Booklet fold and saddle stapling
Media Types Supported
Glossy paper
Plain Paper
Media Sizes Supported
Super Tabloid (12 x 18")
Packaged Size (mm - H x W x D)
806 x 792 x 1095 mm
Packaged Weight, kg
82.0 kg
Size (mm - H x W x D)
1065 x 641 x 658 mm
67.2 kg
Country of Origin
China (PRC)

Name Page Yield
Name Page Yield
25A0013 15000
21Z0357 20000

Name Page Yield