MS911, MX91x Booklet Finisher (4-Hole)

機能

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.

Upper Bin 1

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.

Middle Bin 2

Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor.

Booklet Bin 3

Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 18 sets with up to 15 sheets of folded 20 lb. (75 gsm) paper per set. Bin 3 has a paper present sensor.

Considerations

The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.

The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

技術仕様

部品番号
26Z0082
対応可能用紙の重さ(gsm)
60 ~ 256 g/㎡(gsm)
仕上げ機能
オフセットスタッキング
ステープリング
ホールパンチ
小冊子折りおよび中央ステープル留め
対応用紙種類
光沢紙
Plain Paper
対応用紙サイズ
A3
A4
JIS-B4
帳簿
Legal
Letter
スーパー タブロイド(305 x 457 mm)
SRA3
パッケージ寸法 (mm - H x W x D)
806 x 792 x 1095 mm
パッケージ重量 (kg)
82.0 kg
外形寸法 (mm:高 x 幅 x 奥行)
1065 x 641 x 658 mm
本体重量(kg)
67.2 kg
Country of Origin
China (PRC)
UNSPSC コード
44101705

氏名 印刷可能枚数
氏名 印刷可能枚数
25A0013 15000
21Z0357 20000

氏名 印刷可能枚数