The fuser maintenance kit contains the fuser, 3 pick rollers, a transfer roller and 3 separation rollers. Check the 2 digit type code on the fuser, or check Device Information using the embedded web server or the menus page for a replacement part number.
There are multiple warnings to indicate that the fuser is nearing end of life and that a maintenance kit is required, including error codes 80.0x, 80.1x, and 80.2x. If you receive error code 80.3x, the fuser has reached its rated life and the printer stops until a maintenance kit is installed. You must install the correct Fuser Maintenance Kit for the type of fuser that is installed in the printer.
Št. dela. | 40X8426 |
---|---|
Povprečna zdržljivost |
|
Dimenzije embalaže (mm - V x D x G) |
|
Teža paketa (kg) |
|
UNSPSC koda |
|
---|
Vse informacije se lahko spremenijo brez vnaprejšnjega opozorila. Lexmark ni odgovoren za morebitne napake ali opustitve.
To spletno mesto uporablja piškotke za različne namene, med drugim za izboljšanje vaše izkušnje, analiziranje in oglaševanje. Z nadaljnjim brskanjem po tem spletnem mestu ali s klikom možnosti »Sprejmi in zapri« se strinjate z uporabo piškotkov. Za več informacij preberite našo stran o piškotkih.