CS92x, CX92x, MS911, MX91x Booklet Finisher (3-Hole)

材料編號: 26Z0083

特性

  • Paper Handling
  • 尺寸(公釐 - 高 x 長 x 深): 1065 x 641 x 658 公釐
  • 重量(公斤): 67.2 公斤

產品描述

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor. Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 20 sets with up to 3 sheets of folded 20 lb. (75 gsm) paper per set. Or it supports up to 5 sets with up to 20 sheets per set. Bin 3 has a paper present sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.


The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.


Booklet Bin 3

Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 20 sets with up to 3 sheets of folded 20 lb. (75 gsm) paper per set. Or it supports up to 5 sets with up to 20 sheets per set. Bin 3 has a paper present sensor.


Considerations

The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.


Upper Bin 1

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.


Middle Bin 2

Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor.

一般規格

材料編號 26Z0083
尺寸(公釐 - 高 x 長 x 深)
  • 1065 x 641 x 658 公釐
重量(公斤)
  • 67.2 公斤
包裝尺寸(公釐 - 高 x 長 x 寬)
  • 806 x 792 x 1095 公釐
包裝重量(公斤)
  • 82.0 公斤

正在處理紙張

支援的材質類型
  • 普通紙, 光面紙
支援的紙張重量範圍
  • 60 ~ 256 gsm (gsm)
輸出處理功能
  • 偏位堆疊, 裝訂, 打孔, 小冊子摺疊及騎馬釘裝訂

電子與操作

UNSPSC 碼
  • 44101705
原產地
  • China (PRC)

Lexmark MS911de

Lexmark MS911de

檢查產品

Lexmark MX910de

Lexmark MX910de

檢查產品

Lexmark MX912dxe

Lexmark MX912dxe

檢查產品

Lexmark MX911dte

Lexmark MX911dte

檢查產品

Lexmark CX922de

Lexmark CX922de

檢查產品

Lexmark CX921de

Lexmark CX921de

檢查產品

Lexmark CX923dxe

Lexmark CX923dxe

檢查產品

Lexmark CX923dte

Lexmark CX923dte

檢查產品

Lexmark CX924dxe

Lexmark CX924dxe

檢查產品

Lexmark CX924dte

Lexmark CX924dte

檢查產品

Lexmark CS921de

Lexmark CS921de

檢查產品

Lexmark CS923de

Lexmark CS923de

檢查產品

Lexmark CX920de

Lexmark CX920de

檢查產品