本站点将使用Cookies来实现各种不同功能,包括增强您的体验、分析和广告。继续浏览本站点或单击“接受并关闭”即表示您同意我们使用Cookies。 如需更多信息,请阅读我们的Cookies页面。

固件更新说明

Overview

Firmware update is essential to enhance the printer’s performance and/or fix printer issues. However, this procedure should only be performed if Lexmark Technical Support has recommended a firmware update. Recommendations will be made by a technician if a printer function or printing anomaly is known to be corrected by updating the printer firmware.

How to Check the Firmware Code Level of the Printer

To identify your current firmware code, try either of the following options:

Option 1

Print the Menu Settings Page (MSP).

  1. On the printer control panel, press Menu or Settings.
  2. Press Reports.
  3. Press Menu Settings Page to print.
  4. Look for the Device Information section on the print outs.
  5. Look for Base or Engine.

Option 2

If the printer is connected to the network, you may check its firmware code through the Embedded Web Server (EWS).

  1. Open a browser (e.g., Internet Explorer, Mozilla Firefox, Google Chrome, etc.) and enter the printer's IP address.
  2. Click Reports.
  3. Click Device or Device Information.
  4. Look for Base or Engine.

How to Download Firmware

  • Go to the Drivers & Downloads page.
  • Enter the printer model name and then select Find Drivers & Downloads.
  • Using the table filters, sort by Type: Firmware.
  • When you select the firmware, a modal will pop up with a EULA -- the download will not start until you have read and agree to the terms.

How to Update Firmware

Note: Do not update the firmware if you are unsure about the presence of special code or code that is specific to a Downloadable Language Emulator (DLE). A strong recommendation is to contact Lexmark Technical Support and seek the advice of a trained technician if unsure whether updating firmware is right for you.

  1. Once you have the latest firmware downloaded, extract the zip file and locate the firmware flash (.fls) file.
  2. Printer must be in a Ready state or set the printer to Invalid Engine Code state.
    Note: Contact Lexmark Technical Support on how to set the printer to Invalid Engine Code.
  3. Make sure that NO other option cards are installed in the device, as these options often require specific firmware to operate properly. To do this, print a Menu Settings page and look for these options listed under Installed Features or Installed Options.
    Note: Failure to ignore this step will cause the update to fail, and it can potentially lead an unrecoverable error.
  4. Determine whether your printer is connected via local (USB cable) or network (Ethernet or wireless) and make sure both computer and printer are communicating properly.
  5. Choose firmware update method.
    1. USB Flash Drive or Thumb Drive.
    2. Using a computer.

Document ID:HO550