MS911, MX91x Staple Punch Finisher (4-Hole)
Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.
Upper Bin 1
The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.
Lower Bin 2
The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor.
The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.
The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.
- Part Number
- Paper Weight Range Supported (gsm)
- 60 - 256 gsm
- Finishing Functions
- Offset stacking
- Hole punching
- Media Types Supported
- Plain Paper
- Media Sizes Supported
- Packaged Size (mm - H x W x D)
- 806 x 792 x 1095 mm
- Packaged Weight, kg
- 56 kg
- Size (mm - H x W x D)
- 1065 x 641 x 658 mm
- 43.2 kg
- Country of Origin
- China (PRC)
- UNSPSC Code
Lexmark Return Program Cartridges are sold at a discount versus the prices of Regular Cartridges in exchange for the customer's agreement to use the cartridge only once and return it only to Lexmark for remanufacturing or recycling.
Regular Cartridges are sold at regular prices. These cartridges are also recyclable at no cost through "Lexmark Cartridge Collection Program."