Wired and Wireless Configuration - Configure using a USB cable or without any cables.
An internal print server to connect to most major wireless networks via the 2.4Ghz band using one RP-SMA connector with antenna.
SNMPv3 supports encrypted and authenticated management traffic protecting remote configuration and device status messages. IPSec can be used with both TCP/IP IPv4 and IPv6 networks and provides encryption and authentication of communications at the network layer.
The embedded web page allows administrators to flash update printer firmware or access printer settings using a web browser to easily monitor printer status and change default settings.
Place assets where they are needed - Printer location is functionally and economically driven, not constrained by existing LAN connections.
MarkNet print servers and the standard Ethernet connection support these protocols: TCP/IP IPV4, TCP/IP IPv6, Novell (IPX/SPX including NetWare Directory Services), AppleTalk™ and LexLink (DLC/LLC). All protocols can be active simultaneously. Simultaneous protocol support allows you to print from different systems without reconfiguring the print server.
|Packaged Size (mm - H x W x D)|
|Packaged Weight, kg|
|Network Protocol Support|
|Network Printing Methods|
|Network Management Protocols|
|Microsoft Windows Operating Systems Supported|
|Apple Operating Systems Supported|
|Linux Operating Systems Supported|
|Novell Operating Systems Supported|
|UNIX Operating Systems Supported|
|Other Operating Systems Supported|
|Country of Origin|
1This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)