이 사이트에서는 사용자 경험, 분석 및 광고 개선을 포함한 여러 목적으로 쿠키가 사용됩니다. 이 사이트를 계속 탐색하거나 "수락 및 닫기"를 클릭하면 쿠키 사용에 동의하는 것으로 간주됩니다. 자세한 내용은 쿠키 페이지를 참조하십시오.

Forms and Bar Code Card

부품 번호: 21K0127

기능

  • 애플리케이션 솔루션

제품 설명

The Lexmark Forms and Bar Code Card is designed to accept electronic forms generated using Lexmark Forms Composer and saved in flash memory or hard disk in Lexmark printers using Lexmark Forms Manager. Requires either flash memory or a hard disk for electronic form storage in the MFP or printer. Merge and quickly print forms using only the variable ASCII text data transmitted over the network. This card supports PCL® and PostScript command access for more than 47 industry standard one-and two-dimensional bar codes. Use Lexmark Forms Manager to upload and manage forms, to update firmware and to change the mode. Only one of these cards may be used at any time: Forms and Bar Code, Card for IPDS or Card for PRESCRIBE. These cards are installed in the same single connector.

Generate forms and save in printer

The Lexmark Forms and Bar Code Card is designed to accept electronic forms generated using Lexmark Forms Composer and saved in flash memory or hard disk in Lexmark printers using Lexmark Forms Manager. Requires either flash memory or a hard disk for electronic form storage in the MFP or printer.


Fast and easy to deploy!

Forms are stored in the printer so there is no server to configure and maintain. There is also a low initial investment for a small number of printing devices.


Consideration

Only one of these cards may be used at any time: Forms and Bar Code, Card for IPDS or Card for PRESCRIBE. These cards are installed in the same single connector.


Lexmark Forms Manager

Use Lexmark Forms Manager to upload and manage forms, to update firmware and to change the mode (Print, Data Capture, Disabled, Archive* and Print, and Archive* Only) of the card. *Archive modes require a hard disk.


Simple Data Merge

This card works with Ethernet networks for any host using ASCII, SAP RDI (with Lexmark SAP® R/3® Device Type for PCL) or PCL data. It also supports PCL® and PostScript command access for more than 47 industry standard one-and two-dimensional bar codes.


Merge and Print

Merge and quickly print forms using only the variable ASCII text data transmitted over the network. This card monitors incoming ASCII, SAP RDI or PCL data. In the event that incoming data contains a pattern consistent with conditions set in a resident electronic form, a form merge process is initiated.

일반 사양

부품 번호 21K0127
패키지 크기 (mm - H x W x D)
  • 40 x 230 x 150 mm
패키지 중량(kg)
  • 0.13 kg

전기 및 작동

UNSPSC 코드
  • 44101726
원산지
  • United States

Lexmark CX860de

Lexmark CX860de

제품 보기

Lexmark CS820de

Lexmark CS820de

제품 보기

Lexmark CX820de

Lexmark CX820de

제품 보기

Lexmark CX825de

Lexmark CX825de

제품 보기