The Banner Media Tray is an extension of the Multi Purpose Feeder and allows the automatic feeding of up to 50 sheets of 24 lb. banner paper. It also serves as an extension of the output tray, to hold the printed banner paper as it exits from the printer.
All media which can be fed from the Multi Purpose Feeder can be used when the Banner Media Tray is attached.
The tray cannot be used with a finisher, stacker or mailbox. Banner paper is not supported using duplex mode.
This tray supports banner paper in sizes from 8.27 to 8.5 inches wide (210 to 216 mm) to 14 to 48 inches long (355 to 1219 mm), for weights from 24 to 47 lb. (90-176 gsm). The stack height is 6 mm.
For a paper weight of 28-40 lb (105-151 gsm), banner paper must be printed with Paper Weight set to Heavy. For a paper weight of 43 lb (162 gsm) or greater, banner paper must be printed with Paper Type set to Cardstock.
|Size (mm - H x W x D)|
|Packaged Size (mm - H x W x D)|
|Packaged Weight, kg|
|Media Types Supported|
|Paper Input Capacity|
|Paper Weight Range Supported|
|Harmonized Tariff Code|
|Country of Origin|