이 사이트에서는 사용자 경험, 분석 및 광고 개선을 포함한 여러 목적으로 쿠키가 사용됩니다. 이 사이트를 계속 탐색하거나 "수락 및 닫기"를 클릭하면 쿠키 사용에 동의하는 것으로 간주됩니다. 자세한 내용은 쿠키 페이지를 참조하십시오.

CS92x, CX92x, MS911, MX91x Booklet Finisher (3-Hole)

부품 번호: 26Z0083

기능

  • 용지 관리
  • 제품 크기 (mm - H x W x D): 1065 x 641 x 658 mm
  • 중량 (kg): 67.2 kg

제품 설명

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor. Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 20 sets with up to 3 sheets of folded 20 lb. (75 gsm) paper per set. Or it supports up to 5 sets with up to 20 sheets per set. Bin 3 has a paper present sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Middle Bin 2

Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor.


Upper Bin 1

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.


Considerations

The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.


Booklet Bin 3

Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 20 sets with up to 3 sheets of folded 20 lb. (75 gsm) paper per set. Or it supports up to 5 sets with up to 20 sheets per set. Bin 3 has a paper present sensor.


Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.


The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

일반 사양

부품 번호 26Z0083
제품 크기 (mm - H x W x D)
  • 1065 x 641 x 658 mm
중량 (kg)
  • 67.2 kg
패키지 크기 (mm - H x W x D)
  • 806 x 792 x 1095 mm
패키지 중량(kg)
  • 82.0 kg

용지 취급

지원되는 용지 종류
  • 일반 용지, 광택 용지
용지 무게 지원 범위
  • 60 ~ 256 gsm (gsm)
마감 기능
  • 오프셋 스태킹, 스테이플, 천공, 소책자 접기 및 새들 스태플링

전기 및 작동

UNSPSC 코드
  • 44101705
원산지
  • China (PRC)

Lexmark CX922de

Lexmark CX922de

제품 보기

Lexmark CX921de

Lexmark CX921de

제품 보기

Lexmark CX923dxe

Lexmark CX923dxe

제품 보기

Lexmark CX923dte

Lexmark CX923dte

제품 보기

Lexmark MS911de

Lexmark MS911de

제품 보기

Lexmark CX924dte

Lexmark CX924dte

제품 보기

Lexmark MX910de

Lexmark MX910de

제품 보기

Lexmark CS921de

Lexmark CS921de

제품 보기

Lexmark CS923de

Lexmark CS923de

제품 보기

Lexmark MX912dxe

Lexmark MX912dxe

제품 보기

Lexmark MX911dte

Lexmark MX911dte

제품 보기