이 사이트에서는 사용자 경험, 분석 및 광고 개선을 포함한 여러 목적으로 쿠키가 사용됩니다. 이 사이트를 계속 탐색하거나 "수락 및 닫기"를 클릭하면 쿠키 사용에 동의하는 것으로 간주됩니다. 자세한 내용은 쿠키 페이지를 참조하십시오.

CS92x, CX92x, MS911, MX91x Staple Punch Finisher (3-Hole)

부품 번호: 26Z0081

기능

  • 용지 관리
  • 제품 크기 (mm - H x W x D): 1065 x 641 x 658 mm
  • 중량 (kg): 43.2 kg

제품 설명

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Upper Bin 1

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.


Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.


Considerations

The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.


Lower Bin 2

The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor.


The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

일반 사양

부품 번호 26Z0081
제품 크기 (mm - H x W x D)
  • 1065 x 641 x 658 mm
중량 (kg)
  • 43.2 kg
패키지 크기 (mm - H x W x D)
  • 806 x 792 x 1095 mm
제품 중량 (포장재 제외) (kg)
  • 56 kg

용지 취급

지원되는 용지 종류
  • 일반 용지
용지 무게 지원 범위
  • 60 - 256 gsm (gsm)
마감 기능
  • 오프셋 스태킹, 스테이플, 천공

전기 및 작동

UNSPSC 코드
  • 44101705
원산지
  • China (PRC)

Lexmark CX922de

Lexmark CX922de

제품 보기

Lexmark CX921de

Lexmark CX921de

제품 보기

Lexmark CX923dxe

Lexmark CX923dxe

제품 보기

Lexmark CX923dte

Lexmark CX923dte

제품 보기

Lexmark MS911de

Lexmark MS911de

제품 보기

Lexmark MX910de

Lexmark MX910de

제품 보기

Lexmark CS921de

Lexmark CS921de

제품 보기

Lexmark CS923de

Lexmark CS923de

제품 보기

Lexmark MX912dxe

Lexmark MX912dxe

제품 보기

Lexmark MX911dte

Lexmark MX911dte

제품 보기