このサイトでは、ユーザーエクスペリエンス、分析、広告の改善をはじめ、さまざまな目的のために Cookie を使用しています。 このサイトの閲覧を続けるか、または[同意して閉じる]をクリックすると、ユーザーは Cookie の使用に同意したものと見なされます。 詳細については、弊社の Cookie のページを参照してください。

Forms and Bar Code Card

部品 #: 40C9200

機能

  • Application Solutions

製品の説明

The Lexmark Forms and Bar Code Card is designed to accept electronic forms generated using Lexmark Forms Composer and saved in flash memory or hard disk in Lexmark printers using Lexmark Forms Manager. Requires either flash memory or a hard disk for electronic form storage in the MFP or printer. Merge and quickly print forms using only the variable ASCII text data transmitted over the network. This card supports PCL® and PostScript command access for more than 47 industry standard one-and two-dimensional bar codes. Use Lexmark Forms Manager to upload and manage forms, to update firmware and to change the mode. Only one of these cards may be used at any time: Forms and Bar Code, Card for IPDS or Card for PRESCRIBE. These cards are installed in the same single connector.

Merge and Print

Merge and quickly print forms using only the variable ASCII text data transmitted over the network. This card monitors incoming ASCII, SAP RDI or PCL data. In the event that incoming data contains a pattern consistent with conditions set in a resident electronic form, a form merge process is initiated.


Generate forms and save in printer

The Lexmark Forms and Bar Code Card is designed to accept electronic forms generated using Lexmark Forms Composer and saved in flash memory or hard disk in Lexmark printers using Lexmark Forms Manager. Requires either flash memory or a hard disk for electronic form storage in the MFP or printer.


Fast and easy to deploy!

Forms are stored in the printer so there is no server to configure and maintain. There is also a low initial investment for a small number of printing devices.


Consideration

Only one of these cards may be used at any time: Forms and Bar Code, Card for IPDS or Card for PRESCRIBE. These cards are installed in the same single connector.


Lexmark Forms Manager

Use Lexmark Forms Manager to upload and manage forms, to update firmware and to change the mode (Print, Data Capture, Disabled, Archive* and Print, and Archive* Only) of the card. *Archive modes require a hard disk.


Simple Data Merge

This card works with Ethernet networks for any host using ASCII, SAP RDI (with Lexmark SAP® R/3® Device Type for PCL) or PCL data. It also supports PCL® and PostScript command access for more than 47 industry standard one-and two-dimensional bar codes.

一般仕様

部品 # 40C9200
パッケージ寸法 (mm - H x W x D)
  • 40 x 230 x 150 mm
パッケージ重量 (kg)
  • 0.13 kg

電気/操作

UNSPSC コード
  • 44101726
Country of Origin
  • United States

Lexmark CS720de

Lexmark CS720de

製品を表示

Lexmark CX921de

Lexmark CX921de

製品を表示

Lexmark CX923dxe

Lexmark CX923dxe

製品を表示

Lexmark CX923dte

Lexmark CX923dte

製品を表示

Lexmark MX622ade

Lexmark MX622ade

製品を表示

Lexmark MX522adhe

Lexmark MX522adhe

製品を表示

Lexmark MS826de

Lexmark MS826de

製品を表示

Lexmark CS923de

Lexmark CS923de

製品を表示

Lexmark MX722adhe

Lexmark MX722adhe

製品を表示

Lexmark MX421ade

Lexmark MX421ade

製品を表示

Lexmark MX826ade

Lexmark MX826ade

製品を表示

Lexmark MS521dn

Lexmark MS521dn

製品を表示

Lexmark MX822ade

Lexmark MX822ade

製品を表示

Lexmark MS621dn

Lexmark MS621dn

製品を表示

Lexmark MS622de

Lexmark MS622de

製品を表示

Lexmark CS421dn

Lexmark CS421dn

製品を表示

Lexmark MS823dn

Lexmark MS823dn

製品を表示

Lexmark CS921de

Lexmark CS921de

製品を表示

Lexmark CS521dn

Lexmark CS521dn

製品を表示

Lexmark CX725de

Lexmark CX725de

製品を表示

Lexmark CX725dhe

Lexmark CX725dhe

製品を表示

Lexmark MS822de

Lexmark MS822de

製品を表示

Lexmark MX622adhe

Lexmark MX622adhe

製品を表示

Lexmark MB2546adwe

Lexmark MB2546adwe

製品を表示

Lexmark CS725de

Lexmark CS725de

製品を表示

Lexmark CX522ade

Lexmark CX522ade

製品を表示

Lexmark CX421adn

Lexmark CX421adn

製品を表示

Lexmark MX722ade

Lexmark MX722ade

製品を表示