このサイトでは、ユーザーエクスペリエンス、分析、広告の改善をはじめ、さまざまな目的のために Cookie を使用しています。 このサイトの閲覧を続けるか、または[同意して閉じる]をクリックすると、ユーザーは Cookie の使用に同意したものと見なされます。 詳細については、弊社の Cookie のページを参照してください。

MS911, MX91x Booklet Finisher (4-Hole)

部品 #: 26Z0082

機能

  • Paper Handling
  • 外形寸法 (mm:高 x 幅 x 奥行): 1065 x 641 x 658 mm
  • 本体重量(kg): 67.2 kg

製品の説明

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor. Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 18 sets with up to 15 sheets of folded 20 lb. (75 gsm) paper per set. Bin 3 has a paper present sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Booklet Bin 3

Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 18 sets with up to 15 sheets of folded 20 lb. (75 gsm) paper per set. Bin 3 has a paper present sensor.


Middle Bin 2

Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor.


Considerations

The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.


Upper Bin 1

The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.


Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.


The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

一般仕様

部品 # 26Z0082
外形寸法 (mm:高 x 幅 x 奥行)
  • 1065 x 641 x 658 mm
本体重量(kg)
  • 67.2 kg
パッケージ寸法 (mm - H x W x D)
  • 806 x 792 x 1095 mm
パッケージ重量 (kg)
  • 82.0 kg

用紙処理

対応用紙種類
  • 普通紙, 光沢紙
対応可能用紙の重さ(gsm)
  • 60 ~ 256 g/㎡(gsm)
仕上げ機能
  • オフセットスタッキング, ステープリング, ホールパンチ, 小冊子折りおよび中央ステープル留め

電気/操作

UNSPSC コード
  • 44101705
Country of Origin
  • China (PRC)

Lexmark CX921de

Lexmark CX921de

製品を表示

Lexmark CX923dxe

Lexmark CX923dxe

製品を表示

Lexmark CX923dte

Lexmark CX923dte

製品を表示

Lexmark MS911de

Lexmark MS911de

製品を表示

Lexmark MX910de

Lexmark MX910de

製品を表示

Lexmark CS921de

Lexmark CS921de

製品を表示

Lexmark CS923de

Lexmark CS923de

製品を表示

Lexmark MX912dxe

Lexmark MX912dxe

製品を表示

Lexmark MX911dte

Lexmark MX911dte

製品を表示